Start the company's energy management

The econ sens3 is the optimal device for your start into the company's energy management and thus ideally suited to prepare an energy audit according to DIN EN 16247-1 or a certification of the energy management system according to ISO 50001. The device is installed quickly and easily, even after a few steps the most important electrical parameters are displayed and recorded. The econ sens3 is suitable for 2, 3 and 4 wire systems of any load.

The power is supplied via the AC voltage path or alternatively via 24 VDC. Once the econ sens3 is supplied with voltage, the device begins to record the measurement data.

For current measurement the included Rogowski coils are used. Available in two versions, with 200mm length for currents up to 400A and alternatively 400mm length for currents up to 3000A, the measuring coils are extremely flexible in the application. An installation in existing plants and distribution is therefore possible without any problems.

Communication via Ethernet or Modbus TCP / RTU

The econ sens3 is equipped with various interfaces for best integration, even into existing systems. The Ethernet port allows direct connection to a PC, or alternatively via hub or switch. In addition, measured values ​​via Modbus TCP can be retrieved. Another possibility is to communicate via Modbus RTU, allowing an aggregation of up to 32 participants in a segment.

But the econ sens3 can do even more!

Two upgrade options make the device for energy data acquisition in addition a network analyzer (PRO upgrade) or an extended data logger (LOG upgrade) by which 4 additional analog or digital signals and the providing data for the evaluation can be integrated. Both options can be combined on a single device.

econ sens3

econ sens3 coils econ sens3 with coils